Panasonic dBs Instructions d'exploitation télécharger pdf (Page 75)

Panasonic Digital Business System - Operating Instructions

March 1997 Issue 24

Pulse To Tone Dialling Conversion

The DBS can dial to exchange lines in pulse (LD) or tone (DTMF) signalling modes. This is programmed during

installation. If pulse dialling is used it may not be possible to access some network or dial up services as these

require tone signalling. Therefore it is possible to temporarily change the dialling mode from pulse to tone for the

duration of the current call. this is achieved by dialling a * in the string of dialled digits. The star is not dialled but

digits following it are sent in tone dialling. If the system is already set for tone dialling a star is sent to the line. It is

not possible to switch back to pulse dialling from tone dialling mode.

[Operation]

1 Dial * to switch from pulse to tone dialling

Dedicated Line To Extension

For keysets only. It is possible to dedicate a specific line to an extension for its exclusive use. Other extensions on

the system are not able to access the line. The line is presented at the extension under an FF key and is used by

the owning extension in the usual way.

As a result of the exclusive user status the line will override DND , absence messages and call forwards set at the

extension and ring to the owner extension. Un answered calls will remain at the extension and will not revert to the

operator.

Off Hook Signalling

This feature must be enabled via system programming and is available only to digital keyset users. It allows a

warning tone to be sent from the speaker of keysets when they are busy on a call, if a second call come in for the

extension user. When enabled off hook signalling will not happen if the extension is in a conference call, has an

intercom or non appearing exchange line call on hold or is ringing for an other incoming call.

Music On Hold

The DBS supports music on hold. An external optional music source can be attached to the DBS to play music to

caller who are placed on hold and if required provide background music for the system users. When music on hold

is installed any caller placed on hold will hear the music playing on the music on hold equipment.

Hold Reminder

A recall tone will sound at an extension which has placed a call on hold and not returned to it after the hold recall

timer has expired. The hold recall timer duration is set via system programming and can only be altered by a

suitably qualified engineer. The extension answers a hold recall by lifting the handset.

If the extension does not answer the hold recall the call will revert to the operator unless the system is in night

service or the call is on a dedicated line to the extension.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 147 148

Pas de commentaire

Panasonic dBs Instructions d'exploitation Page 75