Panasonic PAW280MAH2 Instructions d'exploitation télécharger pdf (Page 69)

Control

6. On the CZ-CAPBC2 PCB, located on the lower mounting board inside the AHU Kit enclo-

sure, make sure that switches S1 to S4 are set as follows:

a. S1: Set to “OFF-ON-OFF-ON” (factory default on AHU Kit)

b. S2: All jumpers are intact, i e. no jumper has been cut.

c. S3: Set to “VOLTAGE” or “NO VOLTAGE”, depending on the local digital input (DI) con-

guration.

Control via dry contacts (factory default)

= “NO VOLTAGE”

Control via 12 – 24 V DC signals

= “VOLTAGE”

12 –24 V DC

GND

d. S4: Set to “0–10 V“.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74

Pas de commentaire

Panasonic PAW280MAH2 Instructions d'exploitation Page 69