Panasonic WV-SW598 Guide d'installation télécharger pdf (Page 30)

Connecting to a network using a PoE+ hub when the temperature is –30 °C {–22 °F} or

less

* When connecting to a network using a PoE+ hub when the temperature is –30 °C {–22 °F} or less, use a 24 V AC power

supply or a tested PoE injector.

Hub, router

LAN cable (category 5e or

better, straight)

LAN cable (category 5e or

better, straight)

Tested PoE injector

LAN cable (category 5e or

better, straight)

Video monitor

(for adjustment use only)

Video monitor

(for adjustment use only)

Powered speaker

Plug-in power type

microphone

Plug-in power type

microphone

Power supply

(24 V AC)

RJ-45 female connector

(cable coupler)

RJ-45 female connector

(cable coupler)

Recommended total extended

cable length*

LAN cable (category 5e or better, straight)

Recommended cable length from the speaker: less than 10 m {32.8 feet}

Recommended cable length from the microphone: less than 1 m {3.28 feet}

IMPORTANT:

 • Thevideomonitorisusedforcheckingtheadjustmentoftheangularfieldofviewwheninstallingthecameraorwhen

servicing. It is not provided for recording/monitoring use.

 • Dependingonthemonitor,somecharacters(cameratitle,presetID,etc.)maynotbedisplayedonthescreen.

 • Useaswitchinghuborarouterwhichiscompliantwith10BASE-T/100BASE-TXorbetter.(Whensupplyingthepower

to a hub or router, apply PoE+ (IEEE802.3at compliant).) It is impossible to supply the power to this product from a

PoE hub or router that is compliant with IEEE802.3af standard.

 • IfaPoE+hubisnotused,eachnetworkcameramustbeconnectedtoapowersupply.

 • Whenusing24VAC,powersupplyfromaPoE+huborrouterisnotrequired.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 45 46

Pas de commentaire

Panasonic WV-SW598 Guide d'installation Page 30