Panasonic WV-SW558 Guide d'installation télécharger pdf (Page 17)

When installing the camera on a wall or a ceiling, there are two methods as specified below.

• Using a two-gang junction box

• Use the supplied mount bracket

IMPORTANT:

• Procure 4 screws (M4) to secure the camera attachment (accessory) or the mount bracket

(accessory) to a wall or a ceiling according to the material of the installation area. Do not use

wood screws and nails.

For mounting a camera on a concrete ceiling, use an anchor bolt (for M4) or an AY plug bolt

(M4) for securing.

(Recommended tightening torque M4: 1.6 N·m {1.18 lbf·ft})

• Mount the camera attachment (accessory) in consideration of the camera angle in accordance

with the instructions (

☞ pages 18 and 19).

• Required pull-out capacity of a single screw/bolt is 196 N {44.06 lbf} or more.

• If a ceiling board such as plaster board is too weak to support the total weight, the area shall

be sufficiently reinforced.

The mounting conditions of the camera are described as follows:

Installation

place

Appropriate mount

bracket

Recommended

screw

Number of

screw

Minimum pull-out

strength (per 1 pc.)

Ceiling/wall Two-gang junction box M4 4 pcs.

196 N {44.06 lbf}

Ceiling/wall* Mount bracket (accessory)

(Approx. 350 g {0.77 lbs.})

M4 4 pcs.

196 N {44.06 lbf}

* The conditions for securing the mount bracket to a wall or a ceiling are described here.

Preparations

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

Pas de commentaire

Panasonic WV-SW558 Guide d'installation Page 17