Panasonic WJ-HDE300 Manuel d'instructions télécharger pdf (Page 22)

● Recovery of RAID5 Disk

Replacing and recovering RAID5 disk

When an HDD access indicator on the front panel of the

extension unit is lit red, it indicates that the hard disk drive

malfunctions.

Do the following to replace and recover the faulty hard disk.

Important:

• Immediately replace the hard disk when an HDD

access indicator is lit red. If one indicator is lit red and

the other blinks red, or the second hard disk fails during

the recovery process, it is impossible to recover the

data as a RAID5 system.

• When the ERROR indicator is lit red, it is a system error.

Consult your dealer. Refer to Troubleshooting.

• Refer to

■

Replacing/Mounting HDD for details on

types, mounting positions, and number of hard disk dri-

ves that should be installed in the unit.

1 SAFETY MODE ON

Select ON for "HDD Safety Mode" and close the SETUP

MENU.

→ The recorder will restart and the HDD SAFETY MODE

window will be displayed.

2 Replacement

• Confirm that the HDD POWER indicator on the front

panel of the extension unit went out.

• Replace the faulty hard disk referring to ■

Replacing/Mounting HDD.

• Go to the next step below after finishing the con-

nection of the front cover harness with the unit while

the switches and buttons remain operable (step 11

of ■ Replacing/Mounting HDD).

3 Data Recovery

1 Confirm that the MODE switch is set to RAID5.

2 While holding down the RECOVER button, press the

RESET button.

3 While holding down the RECOVER button, release

the RESET button about 1 second later.

4 Release the RECOVER button after the HDD

POWER indicator turns on (5 seconds later).

5 Repeat the above steps when initializing two or

more units.

→ The HDD access indicator of the drive will blink red

and orange alternately during the recovery process

and will go out when the process is completed

Notes:

• For reference, it will take about 12 hours to complete

the recovery process for 160 GB data.

• Do not operate any switch or button of the extension

unit while the HDD indicator of the drive in the recovery

process blinks red and orange alternately. Otherwise,

the process will fail.

• The recorder can be operated during the data recovery

process, though the recovery time will be lengthened.

Digital Disk Recorder

WJ-HD300A

HDD DISK MENU

TOP MENU THE CANDIDATE FOR A FORMAT

RETURN:

[

SETUP/ESC

]

OK :

[

SET

]

ALL UNIT ONE UNIT

480GB

*(480GB)

ADD (480GB)

480GB

LOST

MAIN

EXT1

EXT2

EXT3

EXT4

EXT5

EXT6

EXT7

SINGLE RAID5

MODE

RESET

HDD POWER

RECOVER

OFF ON

Press

Release

Hold

Release

HDD

POWER

ERROR

OPERATE

SINGLE RAID5

MODE

HDD

POWER

HDD

POWER

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Panasonic WJ-HDE300 Manuel d'instructions Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Réseaux de disques Panasonic WJ-HDE300