Panasonic Web-Server FP Manuel d'utilisateur télécharger pdf (Page 35)

Hardware Description

FP Web-Server V2.11

2.8 Mechanical Installation

a) Adding to FP0:

1. Raise the expansion hooks on the top and bottom sides of the unit with a

screwdriver

2. You can align the pins and holes in the four corners of the control unit and

expansion unit, and insert the pins into the holes so that there is no gap

between the units

However you need not necessarily connect the FP Web-Server in this way.

Note:

Make sure that the FP Web-Server is the last unit attached. Otherwise the CPU

cannot communicate with the expansion units.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 193 194

Pas de commentaire

Panasonic Web-Server FP Manuel d'utilisateur Page 35