Panasonic Web-Server FP Manuel d'utilisateur télécharger pdf (Page 184)

FP Web-Server V2.11

15.7 Troubleshooting

173

4. Verify the FP Web-Server configuration in the FP Web-Configurator Tool

under “Config”

If a static IP address setup should be used (private network or cross-over cable)

Check the IP address settings of your computer and the FP Web-Server configuration.

1. Under "Settings / Network Connections", open the properties dialog of the

computer's Ethernet/LAN card

2. Open the “Internet Protocol (TCP/IP)” properties dialog

The “Subnet mask” setting should be the same as with your FP Web-Server

configuration. Also the left part of the “IP address” (identified by the 255 value in the

1 2 ... 179 180 181 182 183 184 185 186 187 188 189 ... 193 194

Pas de commentaire

Panasonic Web-Server FP Manuel d'utilisateur Page 184