Panasonic Attune II Guide d'installation télécharger pdf (Page 21)

Installation procedures

w Deciding on where to install the Center Module

Select a wall on which to mount this unit, drill a hole in it to pass the wires through, and decide where the four screws are to be

positioned, as shown below.

190

1352540

200

p Ensure that the installation surface has the pull-out strength below.

Important

w Installation

 Mount this unit using the accessory wall mounting bracket and 4 screws (4.1 mm × 25 mm

{5/32 inches × 63/64 inches}).

[Minimum pull-out strength: 780 N {80 kJf}]

Screws (locally procured)

(wood screws:

4.1 mm × 25 mm

{5/32 inches × 63/64 inches})

Wire channel

English

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 83 84

Pas de commentaire

Panasonic Attune II Guide d'installation Page 21