Panasonic WV-TW310 Instructions d'exploitation

Operating InstructionsWearable CameraModel No. WV-TW310LWV-TW310SWV-TW310LEWV-TW310SEBefore attempting to connect or operate this product, please r

IMPORTANT• The default setting of “Automatic installation of viewer software(nwcv4Ssetup.exe)” is “On”. Follow theinstructions on page 49 when the mes

2.3 About the “Live” pageAIDEBCG HF[Setup] button*1Displays the setup menu. The button will turn green and the setup menu will be displayed.[Live] bu

When the FTP access starts, the FTP access indicator will light red. It will go off when the FTP accessstops. Because the SD memory card is being acce

3 About the network security3.1 Equipped security functionsThe following security functions are featured in this camera.Access restrictions by the

4 Display the setup menu from a PCThe settings of the camera can be configured on the setup menu.IMPORTANT• The setup menu is only operable by users

→ The setup menu will be displayed. Refer to page 17 for further information about this menu.Operating Instructions 154 Display the setup menu from a

4.2 How to operate the setup menuABMenu buttonsSetup page1. Click the desired button in the frame on the left of the window to display the respective

In the same manner as above, click the [Set] button (D) below field C when completing the settingitems in field C.4.3 About the setup menu windowBCDE

5 Configure the basic settings of the camera[Basic]The basic settings such as camera title, time and date, and SD memory card can be configured on t

• YYYY/MM/DD: 2012/04/01 13:10:00• Mmm/DD/YYYY: Apr/01/2012 13:10:00• Default:– DD/MM/YYYY (E model)– Mmm/DD/YYYY (P model)[Summer time (daylight savi

PrefaceAbout the user manualsThere are 2 sets of operating instructions for the WV-TW310L, WV-TW310S (P model), WV-TW310LE,WV-TW310SE (E model) as fol

IMPORTANT• It is impossible to display images and to receive audio between the camera and the PC when the viewersoftware “Network Camera View 4S” is n

[Key function]Set the operation to be performed when the REC button is pressed during recording.• Recording extension: The recording time is extended

Note• When the recording time is long, the audio may lag when playing recorded data.[Volume]Select the mic volume from the following.• High: The volum

• [Recording duration] 10min/ 15min/ 20min/ 30min/ 60min/ 90minOn2OffOn1Audio(Pre recording)(Pre recording)(Pre recording)(Pre recording)(Pre recordin

• [Recording duration] 10min/ 15min/ 20min/ 30min/ 60min/ 90minOn2OffOn1Audio(Pre recording)(Pre recording)(Pre recording)(Pre recording)(Pre recordin

IMPORTANT• Use the SD memory card after formatting it using the [SD memory card] tab. If using the SD memorycard that has not been formatted on the [S

6 Configure the settings relating to images[Image]Settings related to image quality can be configured on this page.The “Image” page has 1 tab; the [

6.1.1 Configure the settings relating to image quality (“Imageadjust” setup menu)Click the [Setup>>] button of “Image adjust” on the [Image] ta

• On: The wide dynamic range function will work.• Off: The wide dynamic range function will not work.• Default: OnIMPORTANT• When the wide dynamic ran

In the area of 50 Hz power supply frequency:3/100s, 2/100s, 1/100sIn the area of 60 Hz power supply frequency:3/120s, 2/120s, 1/120s• Under extremely

Product compositionThis product is used in combination with the battery container and the conversion box.<Camera>WV-TW310<Battery container&g

[Blue gain]Adjust the blue color of images.When the cursor is moved in the “+” direction, the blue color will become thicker. When the cursor is moved

6.1.2 Set mask areasWhen “Off” is selected for “Wide dynamic range (WDR)” and “Back light compensation (BLC)” (®page 28), itis possible to compensate

2. Click the [Start] button of “Mask area”.→ Borders will appear and the image displayed on the [Image] tab will be divided into 48 (6x8).3. Click the

7 Configure the settings relating to theauthentication [User mng.]The settings relating to the authentication such as users restrictions for accessi

• Available characters: 0-9, A-Z, a-z and the following marks.! # $ % ' ( ) * + , - . / < = > ? @ [ ] ^ _ ` { | } ~• Default: None (blank)[

8 Configuring the network settings [Network]The network settings can be configured on the “Network” page.8.1 Configure the network settings [Networ

[IP address(IPv4)]When not using the DHCP function, enter the IP address of the camera. Do not enter an IP address alreadyin use (for the PCs and the

[Line speed]Select the line speed for data transmission from the following. It is recommended to use with the default“Auto”.• Auto: Line speed will be

9 Maintenance of the camera [Maintenance]System log check, firmware upgrade check and initialization of the setup menu can be performed on this page

9.2 Upgrade the firmware [Upgrade]Click the [Upgrade] tab of the “Maintenance” page. (®page 14, page 16)The current firmware can be checked and upgra

System configurationNetwork (LAN)Network Camera View 4SWearable Camera Agent SoftwareWearable Camera Viewer SoftwarePC installed with softwareWearable

IMPORTANT• After completing the upgrade, delete temporary internet files. (®page 47)• Upgrade the firmware using a PC in the same subnet as the unit.•

Note• To initialize the network settings (®page 35), turn off the power of the camera, then while rechargingthe battery container, turn on the power a

10 About the displayed system logLog indications relating to loginCategory Indication DescriptionLogin User name• The login user name will be displa

Log indications relating to keysCategory Indication DescriptionKey Power on.• The power was turned on by the Powerbutton.Power off.• The power was tur

11 TroubleshootingBefore asking for repairs, check the symptoms with the following table.Contact your dealer if a problem cannot be solved even afte

Symptom Cause/solution Reference pagesCannot access from the webbrowser.• Is “554” selected for the HTTP port number?For the HTTP port number, select

Symptom Cause/solution Reference pagesNo image is displayed.• Is the viewer software installed on the PC?Install the viewer software on a PC.9• Is the

Symptom Cause/solution Reference pagesImages cannot be saved onthe SD memory card.Failed to write/read data onthe SD memory card.• Is the SD memory ca

Symptom Cause/solution Reference pagesH.264 images are notdisplayed.• When “Network Camera View 4S” is deleted from aPC on which both the viewer softw

Information BarDepending on the OS installed on the PC, the following may occur. Follow the instructions below when thefollowing has occurred. By perf

Table of Contents1 Record and play images ...61.1 Start recording ...

Symptom Cause/solution Reference pagesThe following message isdisplayed on the informationbar.“This webpage wants to installthe following add-on:`nwcv

Operating Instructions 51Notes

For U.S. and Canada:Panasonic System Communications Company of North America,Unit of Panasonic Corporation of North Americawww.panasonic.com/business/

1 Record and play imagesThe following are descriptions of how to record and play images with the camera.1.1 Start recording1. Connect the battery c

2 Change the camera settings from a PCThe following are descriptions of how to change the camera settings from a PC.2.1 Change the camera settings1

3. Press the [Enter] key on the keyboard.→ The “Live” page will be displayed. Refer to page 11 for further information about the “Live” page.When “On”

If these conditions are not met, the H.264 live images are not displayed and a screen similar to thefollowing is displayed.2.2 Viewer softwareIt is n