Panasonic WV-SW395A Instructions d'exploitation télécharger pdf (Page 158)

The restriction settings of PCs (IP address) from accessing the camera can be configured on this page.

[Host auth.]

Select “On” or “Off” to determine whether or not to authenticate the host.

• Default: Off

[IP address]

Enter the IP address of the PC to be allowed to access the camera. Host name cannot be entered for the IP

address.

Note

• When “IP address/subnet mask” is entered, it is possible to restrict PCs in each subnet. For example,

when “192.168.0.1/24” is entered and “2. Camera control” is selected for the access level, the PCs

whose IP address is between “192.168.0.1” - “192.168.0.254” can access the camera with the access

level “2. Camera control”.

• When the IP address already in use is entered and the [Set] button is clicked, the respective host

information will be overwritten.

[Access level]

Select the access level of the host from the following.

1. Administrator/ 2. Camera control/ 3. Live only

Refer to page 156 for further information about the access level.

• Default: 3. Live only

[Host check]

From the pull-down menu of “Host check”, the registered host can be selected and the selected host’s IP

address can be checked.

The registered IP address will be displayed with the access level.

(Example: 192.168.0.21 [1])

To delete the registered host, click the [Delete] button after selecting the IP address to be deleted.

15.3 Configure the settings relating to the priority

stream [System]

Note

• SW175/SW174W/SW172/ST165/ST162 do not support MPEG-4.

Click the [System] tab on the “User mng.” page. (®page 47, page 49)

158 Operating Instructions

15 Configure the settings relating to the authentication [User mng.]

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 243 244

Pas de commentaire

Panasonic WV-SW395A Instructions d'exploitation Page 158