Panasonic WV-SW352 Guide d'installation télécharger pdf (Page 41)

Install the software

Before installing the software, refer to the readme file on the provided CD-ROM first.

Software included on the provided CD-ROM

 • PanasonicIPsettingsoftware

Configure the network settings of the camera. Refer to the following for further information.

 • ViewerSoftware"NetworkCameraView4S"

It is necessary to install the viewer software "Network Camera View 4S" to display images on a

PC. Install the viewer software by double-clicking the "nwcv4Ssetup.exe" icon on the provided

CD-ROM.

Configure the network settings of the camera using the

Panasonic IP setting software

It is possible to perform the network settings of the camera using the IP setup software on the pro-

vided CD-ROM.

When using multiple cameras, it is necessary to configure the network settings of each camera

independently.

If the Panasonic IP setting software does not work, configure the network settings of the camera

and the PC individually on the "Network" page of the setup menu. Refer to the Operating

Instructions (PDF) for further information.

Important:

 • When using Microsoft Windows 7 or MicrosoftWindows Vista, the "Windows Security Alert"

window may be displayed when starting the IP setup software. In this case, disable "User

Account Control" from the control panel.

 • Forthesecurityenhancement,theMACaddress/IPaddressofthecameratobeconfiguredwill

not be displayed when around 20 minutes have passed after turning on the power of the cam-

era. (When the effective period is set to "20min" in the IP setup)

 • PanasonicIPsettingsoftwareisinoperableinothersubnetsviathesamerouter.

 • ThiscameracannotbedisplayedorsetwithanolderversionoftheIPsetupsoftware(version

2.xx).

Configure the network settings

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 51 52

Pas de commentaire

Panasonic WV-SW352 Guide d'installation Page 41