Panasonic WV-SW314 Guide d'installation télécharger pdf (Page 35)

b Mount the tripod head on the top of the camera body with the 4 tripod head mounting screws

that were removed in the step 2.

IMPORTANT:

 • Cautionshallbetakentopreventeachcablefrombeingcaughtbetweenthecamerabodyand

tripod head.

 • Besuretousethescrewsthatwereremovedfromthetripodhead.

Recommended tightening torque: 0.59 N·m {0.44 lbf·ft}

n Secure the camera to the camera mount bracket with the camera fixing screws x3 (accessory).

Pass each cable and the safety wire through the camera mount bracket, and connect the safe-

ty wire to the camera mount bracket. Then, bundle the wire and the cable using the cable

clamp and secure them with each screw from the mounting boss to the camera mount bracket

(

☞ page 20-21).

Camera main body

Tripod head fixing screw x4

(M3x10)

Camera fixing screw x3 (M4 x 8)

(accessories)

Camera mount bracket

IMPORTANT:

 • Besuretousethescrewsthatwereremovedfromthecameramountbracket.

Recommended tightening torque: 0.78 N·m {0.58 lbf·ft}

 • Besuretousethescrewsthatwereremovedfromthesafetywire.

Recommended tightening torque: 0.59 N·m {0.44 lbf·ft}

(This illustration represents WV-SW316.)

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 49 50

Pas de commentaire

Panasonic WV-SW314 Guide d'installation Page 35