Panasonic WV-SW138 Guide d'installation télécharger pdf (Page 19)

Connection

Caution:

• FOR UL LISTED MODEL(S), ONLY CONNECT POE 48 V CLASS 2 POWER SUPPLY (UL

1310/CSA 223) or LIMITED POWER SOURCE (IEC/EN/UL/CSA 60950-1).

Before starting the connection, turn off the power of the devices to be connected.

Check and prepare the required devices and cables for connection.

Connect a LAN cable (category 5 or better, straight, STP) between a PoE device (such as a hub)

and the network connector of the camera.

IMPORTANT:

• Use all 4 pairs (8 pins) of the LAN cable.

• The maximum cable length is 100 m {328

feet}.

• Make sure that the PoE device in use is compliant with IEEE802.3af standard.

• When disconnecting the LAN cable once, reconnect the cable after around 2 seconds. When

the cable is quickly connected, the power may not be supplied from the PoE device.

Network cable

RJ-45 (female)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Pas de commentaire

Panasonic WV-SW138 Guide d'installation Page 19