Panasonic WV-SF342 Guide d'installation télécharger pdf (Page 41)

z Start the Panasonic IP setting software by double-clicking the "EasyIpSetup.exe" icon on the

provided CD-ROM.

x Click the [IP setting] button after selecting the

MAC address/IP address of the camera to be

configured.

Note:

 • When using a DHCP server, the IP address

assigned to the camera can be displayed by

clicking the [Refresh] button of the IP setting

software.

 • WhenaduplicateIPaddressisused,thecorre-

sponding MAC address/IP address will be dis-

played shaded.

c Complete each network setup item and click

the [Apply] button.

Note:

 • WhenusingaDHCPserver,itispossibletoset

"DNS" to "AUTO".

Important:

 • Itmaytakeforaround2minutestocompletetouploadthesettingstothecameraafterclicking

the [Apply] button. The settings may be invalidated when the 12 V DC power supply is cut or

when the LAN cable is disconnected before completing the upload. In this case, perform the

settings again.

 • Whenusingafirewall(includingsoftware),allowaccesstoallUDPports.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

Pas de commentaire

Panasonic WV-SF342 Guide d'installation Page 41