Panasonic WV-SC386 Guide d'installation télécharger pdf (Page 14)

About the [INITIAL SET] button

After turning off the power of the camera, turn on the power of the camera while holding down this button, and wait for

around 5 seconds or more without releasing this button. Wait around 3 minute after releasing the button. The camera will

start up and the settings including the network settings will be initialized. Before initializing the settings, it is recommended

to write down the settings in advance. The initialization will be complete when the live indicator stops blinking orange and

lights off. Note that the preset position settings and the CRT key (SSL encryption key) used for the HTTPS protocol will not

be initialized.

IMPORTANT:

 • Donotturnoffthepowerofthecameraduringtheprocessofinitialization.Otherwise,itmayfailtoinitializeandmay

cause malfunction.

Access indicator

(blinks when accessing)

Link indicator

(lit when linking)

12 V DC power supply terminal

External I/O terminals

Safety wire holder

Audio output connector

Microphone/line input connector

Monitor out connector

for adjustment

Network connector

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Pas de commentaire

Panasonic WV-SC386 Guide d'installation Page 14