Panasonic WV-CP500 Guide d'installation

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.No model number suf

10POWERALARM OUTALARM INGNDVIDEO OUT120V ~ 60HzOperation buttons*: Up button (UP): Down button (DOWN): Left button (LEFT), NEAR: Right button (RIGHT

11Side cover (only for WV-CP500)When the operation buttons are used, the side cover is slide leftward to the lock posi-tion.ALC lens connect

12Precautions for installationThis camera is designed to be used indoors. This camera is not operable out-doors. Do not operate this product beyond th

13Power cord (only for WV-CP500)Connect the power cord securely. Run the power cord so that no load is applied to the cord when panning or ti

14Installation and connectionz Rotate the lens (option) clockwise slowly to mount the lens. Important: • ForuseofC-mountlens,usetheC-mounta

15ALC lens connector1 32 4Screws (locally procured)Screws (locally procured)<Installation sample on a ceiling>Camera mount bracket (option)x Co

16 • Themountingconditionsofthecameramountbracketaredescribedasfollows: For some applicable mount brackets, "A" is attached

17v The video output cable is connected to this video output connector. Important: • Besuretoturnoffthepowerofeachdevicebeforeconnection

18External synchronization switchThe settings of the alarm input/output are configured on the SETUP menu. Refer to the network operating instructions

19n Turn on the power. WV-CP500 The included power cord is connected to this power connector. Connect between the power connector on the r

2CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PER

20m Adjust the camera angle by loosening the screw of the camera mount bracket while viewing the video monitor. Be sure to loosen the screw of t

21 e To perform fine adjustment of the back focus after automatic back focus adjustment, use the right or left button. (No operation for

22Setup menuPerforming each setting item in the setup menu should be completed in advance to use this unit. Perform the settings for each item in acco

23Setup item DescriptionSPECIALCHROMA GAIN Adjusts the chroma level. AP GAIN Adjusts the aperture level. PEDESTAL Adjusts the pedestal (brightness)

24Screenshot 2The setup mode changes to "ENABLE", and the setup menu becomes ready to be set. Step 3Move the cursor to the item

25Screenshot 3The selected setup screen in the setup menu appears on the screen. Note: • If the top screen of the setup menu iscalled up

26Screen transition diagram MODEL WV-CP500 SERIESCAMERA ID OFFCAMERA SYSTEMBACK-FOCUS SPECIALLANGUAGE END SETUP ENABLE **CAMERA SETUP*

27•Arethepowercordandcoaxialcableconnected appropriately? → Check whether the connection is appropriately established. Cause/solution•Is

28•Thepowercord,power connector, or power plug is damaged. Use of the damaged cord, connector, or plug may cause electric shock or fire. Di

29Specifications• GeneralPower source: WV-CP500: 120 V AC 60 Hz WV-CP504: 24 V AC 60 Hz, 12 V DCPower consumption: WV-CP500: 3.2 W WV-CP504: 24 V AC

3Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5)

30Functions: Camera title: Up to 16 characters (alphanumeric characters, marks) Light control mode setting: ALC/ALC+/ELC Super Dynamic 5 ON/ON (

31

Panasonic System Solutions Company,Unit Company of Panasonic Corporation of North Americawww.panasonic.com/business/For customer support, call 1.800.5

4Limitation of liabilityTHIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT

5PrefaceThis product is a 1/3-inch type {1/3"} CCD color CCTV camera. Connection of this product to a video monitor allows users to use this prod

6About the user manualsTrademarks and registered trademarksThe operating instructions of the camera consist of 2 sets: this book and operating instruc

7ContentsImportant safety instructions... 3Limi

8PrecautionsThis product has no power switch. Power is supplied from an external 12 V DC/ 24 V AC (WV-CP504) or 120 V AC (WV-CP500) power-supply d

9Major operating controls and their functions(UP)(LEFT)(RIGHT)(DOWN)(SET)NEARFARBF/MENUSide view (WV-CP500)Side view (WV-CP504)ALC lens connectorInsid