Panasonic WV-CF504 Guide d'installation

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.The model number is

10[Precautions for use]This product is designed to be used indoors.This product is not operable outdoors.This product has no power switch. When turni

11Precautions for installationThis product is designed to be used indoors.This product is not operable outdoors.Do not expose the product to dir

12mounting area and the total weight of objects to be mounted.Screw tightening • The screws and bolts must be tightenedwith an appropriat

13Major operating controls and their functionsTOPLOCK w Power cordq Video output cablee Dome cover!8 Inner domer Panning table!0 Zoom lock knob!1 Focu

14 q Video output cable w Power cord e Dome cover r Panning table Rotate this table to adjust the panning angle of the camera. t Monitor

15PreparationsWhen installing the camera on a wall or a ceiling, there are four methods as specified below. (☞ Pages 16 and 17) • U

16Method of camera installationUsing the two-gang junction boxMount the camera on the two-gang junction box by fixing 4 screws (locally procured) (☞ p

17Using the ceiling mount bracket WV-Q175 (option)It is possible to reduce the exposed portion of the camera body using the ceiling mount bracke

18z Remove the dome cover fixing screw (M3, step screw, x1). x Adjust the fixing screw marker on the cam-era to “I” on the dome cover, and turn the

19Using the side cable access holeWhen installing the camera directly on the ceiling or wall with cables exposed, cut out a portion of the dome cover

2CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PER

20Camera installationz Mount the camera. <To mount the camera on a two-gang junction box or wall/ceiling> a. Connect the power cord and the v

21x Secure the camera to the camera attachment with the camera fixing screw. (Recommended tightening torque: 0.78 N·m {0.58 lbf·ft})c Remove

22Adjust the cameraz Be sure to view the monitor for adjustment when the camera angle is adjusted. Connect the monitor for adjustment (e.g. a sm

23x Adjusts the focus. Focus adjustment shall be performed when camera angle adjustment are performed. Adjust the focus by following the

24v To perform fine adjustment of the back focus after the ABF operation indicator goes off and automatic back focus is adjusted, use the right or l

25 w Reinstall the dome cover fixing screw.Important: • Attachtheinnerdomeinaccordancewiththelensdirectiontonottochangethelensdirec

26Make a connectionCautions: • FOR UL LISTED MODEL(S), ONLY CONNECT THIS TO 24 V AC OR 12 V DC CLASS 2 POWER SUPPLY. • Besuretoconnectth

27• Cord length and wire gauge24 V ACThe recommended cord length and copper wire size are shown in the table for reference. The voltage supplied

28About the setup menusPerforming each setting item in the setup menu should be completed in advance to use this unit. Perform the settings for each i

29Setup item DescriptionSPECIALCHROMA GAIN Adjusts the chroma level. AP GAIN Adjusts the aperture level. PEDESTAL Adjusts the pedestal (brightness) le

3We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative

30Screenshot 2The setup mode changes to "ENABLE", and the setup menu becomes ready to be set. MODEL WV-CF504CAMERA ID OFFCAMERA

31Screen transition diagram MODEL WV-CF504CAMERA ID OFFCAMERA SYSTEMBACK-FOCUS SPECIALLANGUAGE END SETUP DISABLE **CAMERA SETUP** SCEN

32TroubleshootingBefore asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after

33Specifications• BasicPower source: NTSC: 24 V AC 60 Hz, 12 V DC PAL: 24 V AC 50 Hz, 12 V DCPower consumption: 24 V AC: 3.4 W 12 V DC: 280

34Dynamic range: NTSC: 52 dB typ. (Super Dynamic 5 ON) PAL: 54 dB typ.(Super Dynamic 5 ON)Monitoroutput: VBS:1.0V[p-p]/75Ω,NTSC/PALcompos

35Standard accessoriesCD-ROM*1 ... 1 pc.Installation Guide (this book) ...

For U.S. and Canada:Panasonic System Networks Company of America,Unit of Panasonic Corporation of North Americawww.panasonic.com/business/For custom

4Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5)

5Limitation of liabilityTHIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDIN

6ContentsImportant safety instructions ... 4Limi

7PrefaceThis product is a 1/3 type CCD color CCTV camera. Connection of this product to a video monitor allows users to use this product as a monitori

8About the user manualsTrademarks and registered trademarksThere are 2 sets of operating instructions for the WV-CF504 (NTSC model), WV-CF

9PrecautionsThe following points as well as the con-tents of "Warning" and "Caution" shall be observed. Refer installation work to