Panasonic KX-HCM110A Instructions d'exploitation télécharger pdf (Page 145)

Operating Instructions

[For assistance, please call: 1-800-272-7033] 145

3.3 External I/O

If you connect the external devices such as sensors to the External I/O and image

buffer/transfer by alarm signal is set, the camera image is transferred by the alarm

detection.

Explanation of the External I/O

Note

The External I/O (Input/Output) is independent. Output terminal is controlled

only by External Output Control page on page

132.

Pin Features

G GND pin

1 External Sensor Input 1

• Use it by opening or GND short-circuit.

G GND pin

2 External Sensor Input 2

• Use it by opening or GND short-circuit.

3 External Device Control Output

• You can control it on the External Output page (see page 132).

• It is an open collector circuit, and the maximum drawing-in current

is the same as pin 4. Do not exceed the voltage of DC power

output terminal (pin 4).

4 DC Power Output Terminal

• 10.5—13.5 V DC

• Maximum of 100 mA load drive is possible.

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 175 176

Pas de commentaire

Panasonic KX-HCM110A Instructions d'exploitation Page 145