Panasonic WJ-HD616 Guide d'installation télécharger pdf (Page 77)

Step 1

Select the [Area/Sensitivity] tab and select the [Setup] button

of one of the detection areas (A to D).

→ A detection area setup page will open.

Note:

 • Whenselectingthe[Allarea]button,alltheareaonthe

displayed image can be set as the detection area.

Step 2

Set the start point of the detection area.

Press the [SET] button after moving the cursor to the desired

start point of the detection area using the arrows button (C

D A B). When using a mouse, click the start point.

Settings for the video motion detection function

Configure the settings for video motion detection areas for each camera channel. Up to 4 areas can be set for a camera channel

for the detection area.

When selecting "On" for "Search" on the [VMD] tab and selecting "Area", a detection area setup page will be displayed.

(+ Page 75)

Follow the procedure below to set the VMD areas.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 155 156

Pas de commentaire

Panasonic WJ-HD616 Guide d'installation Page 77