Panasonic WJ-ND400 Guide d'installation télécharger pdf (Page 13)

Note:

 • Basically,eachindicatorwillindicatethestatusofthe

respective hard disk drive (HDD1 - HDD9).

Important:

When the indicator lights red in the RAID 5/RAID 6 mode,

replace the respective hard disk drive immediately. Contact

your dealer about servicing.

 • IntheRAID5mode:

When 2 or more HDD access indicators light/blink red,

it may be impossible to recover data on the respective

hard disk drives.

 • IntheRAID6mode:

When 3 or more HDD access indicators light/blink red,

it may be impossible to recover data on the respective

hard disk drives.

HDD status indicator (left side)

Indicates the operational status of the respective hard disk

drive.

Lights green: Indicates that the power of the respective

hard disk drive (formatted) is on.

Blinks green: Indicates that the respective hard disk drive

is for playback use only.

(Recording is unavailable using the respective hard

disk drive.)

Blinks orange: Indicates that the respective hard disk drive

is currently being formatted or during the recognition

process.

Lights red: Indicates that formatting of the respective hard

disk drive has failed.

Off: Indicates that the power of the respective hard disk

drive is off, or that the hard disk drive is not connect-

ed/recognized.

u Key hole

Use the provided key to open/close the front cover.

Keep the key in a safe place.

Lock the front cover: Insert, push and turn the key to the

left.

Unlock the front cover: Insert, push and turn the key to

the right.

i Maintenance port (For maintenance purpose only)

Use this port to connect directly to a PC and perform

maintenance operations. Do not use for normal operation.

Note:

 • WhenconnectingtoaPCdirectly,usethestraightLAN

cable.

o Recording indicator (REC)

Lights when recording is being performed, and goes off

when recording is finished.

!0 Timer indicator (TIMER)

Lights orange when the schedule recording is set, and

blinks orange while the schedule recording is being per-

formed.

!1 Operation indicator (OPERATE)

Lights green when the power is turned on, and goes off

when the power is turned off.

!2 Arrow buttons (up, down, left and right)

Use these buttons to move the cursor or to enter values

on the LCD.

!3 [SET] button

Use this button to determine the edited setting item on the

LCD.

!4 [ESC] button

Use this button to display the previously displayed item on

the LCD.

!5 [LINK/ACT] indicators

[LINK/ACT1] indicator

Lights green when the communication between a camera

and the recorder is established.

Blinks green when receiving data from a camera.

[LINK/ACT2] indicator

Lights green when the communication between a PC and

the recorder is established.

Blinks green when receiving data from a PC.

When PCs and cameras are connected only to the client

PC port (1-port operation), this indicator will light/blink.

[LINK/ACT3] indicator

This indicator is a spare for expansion.

!6 Front cover

Open the front cover when adding/replacing the HDD

units, or when changing the operational mode (Single/

RAID 5/RAID 6).

Keep this cover closed and locked during normal opera-

tion.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 63 64

Commentaires sur ces manuels

Pas de commentaire

Panasonic WJ-ND400 Guide d'installation Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Réseaux de disques Panasonic WJ-ND400