Panasonic PTLB20NTU Instructions d'exploitation télécharger pdf (Page 21)

ENGLISH-21

Getting started

Connections

Notes on connections

Read the instruction manual for each peripheral device carefully before connecting it.

Turn off the power supply for all peripheral devices before making any connections.

If the cables necessary for connection are not included with the peripheral device or

available as an option, you may need to prepare a proper cable for the device concerned.

If there is a lot of jitter in the video signal, the projected image may flicker. In such cases,

it will be necessary to connect a TBC (time base corrector).

Refer to the list on page 62 for details on compatible signals which can be input to the

projector.

Only one audio system circuit is available for the AUDIO IN L-R connectors, so if you

change the audio input source, you will need to remove and insert the appropriate plugs.

Connecting to computer

RGB signal cable

(accessory)

Computer

DIN 8-pin

(male)

Computer for

control use

Monitor

RGB signal cable

Refer to the accessory CD-ROM

for details on the wireless

network that can be used for

controlling the projector with a

personal computer.

(PT-LB20NTU only)

Serial adapter

(ET-ADSER : sold

separately)

NOTE:

B Do not input the signal to the RGB2 IN/1 OUT connector when “RGB2

SELECT” in the “OPTION” menu is set to “OUTPUT”. (page 46)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 143 144

Pas de commentaire

Panasonic PTLB20NTU Instructions d'exploitation Page 21