Panasonic PT-LB20NTU Manuel d'utilisateur télécharger pdf (Page 43)

Using WebBrowser (cont.)

■ Setting the infrastructure mode

You can make the setting for infrastructure mode (connection through the access point

(AP) ); however, confirm to your system Administrator before changing any settings.

Network setting window

Click [Network setting] on the

menu.

Click [Next].

The Settings window appears.

IP ADDRESS

DHCP ON : Check this if the AP supports DHCP.

DHCP OFF : Check this if the AP does not support DHCP, and make the

following settings:

IP ADDRESS : IP address designated for projector

SUBNETMASK : SubNetMask used by the AP

GATEWAY : IP address of GateWay registered in the AP

MODE

Check “INFRASTRUCTURE”

(If this is performed directly at the computer rather than via the AP, check

“802.11 AD-HOC.”)

SSID

Enter SSID registered in the AP.

(If this is connected in AdHoc mode, set the SSID of the computer.)

(Continued on next page)

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 56 57

Pas de commentaire

Panasonic PT-LB20NTU Manuel d'utilisateur Page 43