Panasonic CF-E1M Manuel d'utilisateur télécharger pdf (Page 32)

Using Audio Devices

Microphone / Headphone / Speaker

• ' c;

«> •) p)

Headphone Jack

Use this jack to connect headphones or amplifier-equipped speakers.

Audio output from the internal speaker is disabled when headphones

or external speakers are connected.

Microphone Jack

Use only a monaural condenser microphone (miniature jack).

Using an input source other than a normal dynamic microphone may not allow

audio to be input or may damage the equipment.

When an extcnial microphone is connected to the microphone jack, the internal

microphone cannot be used.

note)-

About adjust the sound volume (C^ page 8, 22).

Optical Digital Audio Output Terminal

It is possible to connect a Home Theater System or other Panasonic digital audio device

with an optical input connector to this terminal. (The optical digital cable* is necessary.)

*The cable type may differ depending on the shape of the optical input

connector of the device to connect.

Be sure to read the instructions manual of the device.

Optica) Digital Audio OutputTerminal

To connect a device, perform the following steps:

® Cut the power of the computer and the device to connect.

(1) Remove the cap on the computer (C^ page 9).

(D Connect the optical input terminal of the device with the optical digital audio output

terminal of the device to connect with the above cable.

• Read the instructions manual of the device for information on how to record sound

media.

• When the optical digital audio output terminal is not being used, be sure to attach the

cap to protect the terminal.

Xnote>

When no sounds arc being output, double click the [YAMAHA DS-XG Audio Config]

icon of the [Control Panel] and confirm the settings of the [Digital Output] tab (C?*

page 23).

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 63 64

Pas de commentaire

Panasonic CF-E1M Manuel d'utilisateur Page 32