Panasonic SCPTX7 Instructions d'exploitation Page 96

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 112
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 95
RQT8927
96
Changing the network settings
These settings are used if you will connect this unit to a
network.
Preparation
1 To display the picture turn on the television and
select the appropriate video input to suit the
connections to this unit.
2 Press [Í].
1 Press [SETUP].
2
Press [
34
] to select “Other Setup” and press
[ENTER].
3 Press [34] to select “Network” and press [1].
4 Press [34] to
select “Network
Settings” and
press [ENTER].
The network connection status is displayed.
In most cases, default settings can normally be used
without making any changes.
When connecting this unit to a network and assigning a
fixed IP address, perform the following settings.
After performing steps 1–4 ( above)
5 Press [34] to select “TCP/IP 1” and press
[ENTER].
6 Press [34] to select “IP Manual Setting” and
press [ENTER].
7 Press [34] to
select the item to
be set and press
[ENTER].
8 Enter numbers with the numbered buttons and
press [ENTER].
After checking the specifications for your
broadband router, enter each number.
The numeric input range is between 0 and 255.
Repeat steps 7–8, and enter numbers for other items.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
If you made an input mistake
Move the cursor with [21] and make corrections with
the numbered buttons.
To delete settings and use default settings
Select “IP Auto Setting” in step 6 and press [ENTER].
In most cases, default settings can normally be used
without making any changes.
When setting an assigned DNS server from your ISP,
perform the following settings.
After performing steps 1–4 ( left)
5 Press [34] to select “TCP/IP 2” and press
[ENTER]
.
6 Press [34] to select “DNS Manual Setting”
and press
[ENTER]
.
If “TCP/IP 1” is set to “IP Manual Setting”, the
“DNS Auto Setting” will not be displayed.
7 Press [34] to
select the item to
be set and press
[ENTER]
.
8 Enter numbers with the numbered buttons and
press [ENTER].
Follow the instructions given by your ISP and
enter the numbers.
The numeric input range is between 0 and 255.
Repeat steps 7–8, and enter numbers for other
items.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
If you made an input mistake
Move the cursor with [21] and make corrections with
the numbered buttons.
To delete settings and use default settings
Select “DNS Auto Setting” in step 6 and press [ENTER].
After performing steps 1–4 ( left)
5
Press [
34
] to
select “IP Address”
and press
[ENTER]
.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
Common procedures
Manually setting the IP address
TCP/IP 1
TCP/IP 2
IP Address
Auto Setting
Auto Setting
Network Settings
Connected to network.
IP Address
Subnet Mask
0. 0. 0. 0
0. 0. 0. 0
Gateway
0. 0. 0. 0
IP Manual Setting
Manually setting the DNS server
To check the IP Address, etc.
Primary DNS Address
Secondary DNS Address
0. 0. 0. 0
0. 0. 0. 0
DNS Manual Setting
[MAC Address]
[IP Address]
[Subnet Mask]
[Gateway]
[Primary DNS Address]
[Secondary DNS Address]
00-00-00-00-00-00
---.---.---.---
---.---.---.---
---.---.---.---
---.---.---.---
---.---.---.---
IP Address
PTX7EB.book Page 96 Monday, March 12, 2007 10:13 AM
Vue de la page 95
1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 111 112

Commentaires sur ces manuels

Pas de commentaire