Panasonic WV-SF332 Guide d'installation

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.The model number is

10Network securityAs you will use this unit connected to a network, your attention is called to the following security risks. q Leakage or theft

11PrecautionsRefer installation work to the dealer. Installation work requires technique and experi-ences. Failure to observe this may cause fi

12Turn the power off when cleaning of this product. Failure to observe this may cause injury. [Precautions for use]This product is designed to be used

13 • When using an unformatted SDHC/SDmemory card, format it using this camera. Recorded data on the SDHC/SD memory card will be deleted

14Precautions for InstallationInstallation work shall be performed in accordance with the technology standard of the electric installation. This c

15Radio disturbanceWhen this product is used near TV/radio anten-na, strong electric field or magnetic field (near a motor, a transformer or a po

16Major operating controls * This connector is provided only for service. Do not use the connector for checking the adjust-ment of the angular field

17<Side view>About the [INITIAL SET] buttonAfter turning off the power of the camera, turn on the power of the camera while holding down this bu

18Detaching the dome coverImportant: • Afterremoval,retainthedomecoverfixingscrewsoasnottolose.Thescrewisrequiredwhenattaching the

19PreparationsWhen installing the camera on a wall or a ceiling, there are four methods as specified below. (☞ Pages 20 and 21). •

2CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PER

20Using the side cable access holeWhen installing the camera directly on the ceiling or wall with cables exposed or when using the optional ce

21Installing the camera directly on the ceiling or wallPlace the installation template label (accessory) on the ceiling or wall, and make a hole to pa

22Insert/remove an SDHC/SD memory cardImportant: • BeforeinsertingtheSDHC/SDmemorycard,turnoffthepowerofthecamerafirst. • Wheninser

23ConnectionBefore starting the connection, turn off the power of this camera and the devices to be connected. Check and prepare the required devices

24c Connect an external speaker with amplifier to the audio output connector (for use of the audio transmission function). Connect a stereo m

25Important: • Donotconnect2wiresormoredirectlytoaterminal.Whenitisnecessarytoconnect2wiresor more, use a splitter.  • Connect

26Important: • Besuretousethepowercordplugprovidedwiththisproduct. • Besuretofullyinsertthepowercordplugintothe12VDCpowe

27Connection example when connecting to a network using a PoE hubPoE device (hub)PCMicrophone (option)Microphone (option)Speaker with amplifier (option

28InstallationCamera mountingInstallation shall be conducted after turning off each device. z Detach the dome cover. (☞ Page 18)x Connect the cables

29Adjustmentz Adjust the camera angle. When determining the camera angle, repeat fine adjustments by gradually moving the panning table,

3We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative

30Note: • Whenthecameraisusedatanangularfieldofviewthatisclosetohorizontal,itmustbenotedthat the shadow of the dome cover may be

31 w When the auto focus (AF) button on the lateral side of camera is pressed, the auto focus (AF) indicator will light for around 10 seconds, and th

32 Adjust the angular field of view and the focus. SF335SF332 The angular field of view and focus can be adjusted in accordance with the distance be

33Note: q When shooting the following subjects, close the "FOCUS ADJUSTMENT" menu by pressing the focus assist (F.A.) button aga

34Attaching the dome coverz Align the indication "OPEN" to the maker of the camera to attach the dome cover. x Remove the cover f

35Important: • Forinnerdomeadjustments,adjustthemarkertothe"ADJUST"position. If the dome section is moved with unreasonable forc

36Configure the network settingsInstall the softwareBefore installing the software, refer to the readme file on the provided CD-ROM first. Software in

37z Start the Panasonic IP setting software. x Click the [IP setting] button after selecting the MAC address/IP address of the camera t

38TroubleshootingBefore asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after

39Specifications● BasicPower source: 12 V DC, PoE (IEEE802.3af compliant)Power consumption: WV-SF336 12 V DC*: 320 mA, PoE: 4.2 W (Class 2 devi

4ContentsImportant safety instructions ... 5Limi

40 WV-SF332 (800×600) Color: 0.2 lx {0.02 footcandle} (F1.4, Auto slow shutter: Off (1/30 s), AGC: High) 0.013 lx {0.0013 footcandle} (F1.4,

41Resolution: Aspect ratio: 4:3(WV-SF332) H.264 800 × 600/VGA (640 × 480)/QVGA (320 × 240), max. 30 fps MPEG-4 VGA (640 × 480)/QVGA (320 × 240

42Multi-screen: Up to 16 camera images can be displayed simultaneously on a multi-screen.Compatible SDHC/SD memory card (option): Manufactured by

Information for Users on Collection and Disposal of Old Equipment and used BatteriesThese symbols on the products, packaging, and/or accompanying docu

For U.S. and Canadian fields:Panasonic System Networks Company of America,Unit of Panasonic Corporation of North Americawww.panasonic.com/business/F

5Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5)

6Limitation of liabilityTHIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDIN

7The network cameras WV-SF330 series are designed to operate using a PC on a network (10BASE-T/100BASE-TX). By connecting to a network (

8About the user manualsThere are 2 sets of operating instructions for the WV-SF336, WV-SF335, WV-SF332 (NTSC model), WV-SF336E, WV-SF335E, WV-SF332E (

9System requirements for a PCCPU: Intel® CoreTM2 Duo 2.4 GHz or faster recommendedMemory: 512 MB or more (A minimum of 1 GB memory is required when